Automatic Tube Filling Sealing Machine

Product Details:

Tube Filling Machine is the simple and sturdy machine for filling of cream, paste/pharmaceuticals/ cosmetic/foods paste in tubes. Filling, Sealing Crimping, Batch Coding and Tube ejecting is done in sequential operation on a rotary table. The machines are made in two versions- one of plastic/laminated tubes and other for aluminium tubes. Plastic laminated tubes are heat sealed whereas aluminium tubes are crimped.

In Automatic Laminated Tube Filling Machine, the tubes are filled by stainless steel syringe pump. Filling volume can be accurately set as required. Different type of syringes is recommended for the different range of filling volume. In Automatic Laminated Tube Filling Machine plastic/laminated tubes are sealed using the latest technology of hot air jet that eliminates direct contact of heated jaws with tubes, thus giving cleaner contact of heated and softened edges of the tube are then pressed by pneumatically operated jaws for sealing and batch code embossing.

Features:

• Machine has a main machine frame with stainless steel covers
• Acrylic doors on all four sides of main frame
• Adjustable anti-vibration legs
• AC inverter for main drive for step-less speed variation
• Automatic tube hopper with pneumatic system of tube insertion into rotary index table
• Rotary index table for transferring tubes to filling, closing stations and other sections
• Tube orientation controlled by photocell for accurate positioning of tubes
• Tube cleaning by blow of compressed air inside tube
• 50 litres capacity stainless steel hopper
• Stainless steel volumetric dozing syringe and Teflon piston seals for accurate dosage with step-less adjustment of volume
• Tube lifting at filling station – so that filling nozzle gets inserted inside tube during filling
• Tail cutting by 'suck back' method to prevent dripping of product after filling
• Hot air tool for plastic / laminated tubes (Leister make heater)
• PID temperature controller for accurate control of hot air temperature
• Air supply to air heater through independent blower
• Batch code embossing facility within sealing jaws (by using negatively etched character type fount)
• Trimming of plastic / lami tubes at the top end
• Automatic tube ejection
• Preset counter
• No−Tube−No−Fill system
• Control sensor for non-ejected tubes
• Safety interlocks for acrylic doors
• Low air pressure switch
• Emergency stop
• Fixed position machine stop

 

Specification of Other Available Models:

 

 

 

Additional Information:

• Item Code: FILLTUBE-120
• Production Capacity: 3 Piece/ Month
• Delivery Time: 4 to 12 weeks depending on model

Product Details:

High Speed Automatic Tube Filling Machine by Jicon Technologies Pvt. Ltd. is engineered to fill and seal aluminum tubes with unmatched speed, accuracy, and reliability. Designed for pharmaceutical, cosmetic, and food industries, this machine is ideal for creams, gels, ointments, balms, pastes, and fluid materials. Built to meet international quality norms, it features a special sealing mechanism ensuring clean, secure tube closures. With advanced automation for loading, filling, sealing, ejecting, and orientation, our models deliver outputs from 30 to 60 tubes per minute. Low maintenance, high functionality, and long-lasting performance make it a preferred choice worldwide.

Product Details:

FILLTUBE−120 is designed to fill and seal plastic and laminate tubes. The machine is suitable especially for pharmaceutical, cosmetic and foodstuff industry. Machine can be used for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system.

 

The machine is designed and manufactured to suit FDA and cGMP requirements. All contact parts stainless steel, well-polished and mirror buffed. The machine produced from tested and reliable materials for long service life.

Additional Information:

• Delivery Time: 3-4 Week

Product Details:

Tube Filling Machine is the simple and sturdy machine for filling of cream, paste/pharmaceuticals/ cosmetic/foods paste in tubes. Filling, Sealing Crimping, Batch Coding and Tube ejecting is done in sequential operation on a rotary table. The machines are made in two versions- one of plastic/laminated tubes and other for aluminium tubes. Plastic laminated tubes are heat sealed whereas aluminium tubes are crimped.

In Automatic Laminated Tube Filling Machine, the tubes are filled by stainless steel syringe pump. Filling volume can be accurately set as required. Different type of syringes is recommended for the different range of filling volume. In Automatic Laminated Tube Filling Machine plastic/laminated tubes are sealed using the latest technology of hot air jet that eliminates direct contact of heated jaws with tubes, thus giving cleaner contact of heated and softened edges of the tube are then pressed by pneumatically operated jaws for sealing and batch code embossing.

Features:

• Machine has a main machine frame with stainless steel covers
• Acrylic doors on all four sides of main frame
• Adjustable anti-vibration legs
• AC inverter for main drive for step-less speed variation
• Automatic tube hopper with pneumatic system of tube insertion into rotary index table
• Rotary index table for transferring tubes to filling, closing stations and other sections
• Tube orientation controlled by photocell for accurate positioning of tubes
• Tube cleaning by blow of compressed air inside tube
• 50 litres capacity stainless steel hopper
• Stainless steel volumetric dozing syringe and Teflon piston seals for accurate dosage with step-less adjustment of volume
• Tube lifting at filling station – so that filling nozzle gets inserted inside tube during filling
• Tail cutting by 'suck back' method to prevent dripping of product after filling
• Hot air tool for plastic / laminated tubes (Leister make heater)
• PID temperature controller for accurate control of hot air temperature
• Air supply to air heater through independent blower
• Batch code embossing facility within sealing jaws (by using negatively etched character type fount)
• Trimming of plastic / lami tubes at the top end
• Automatic tube ejection
• Preset counter
• No−Tube−No−Fill system
• Control sensor for non-ejected tubes
• Safety interlocks for acrylic doors
• Low air pressure switch
• Emergency stop
• Fixed position machine stop

 

Specification of Other Available Models:

 

Additional Information:

• Item Code: ATF-I
• Production Capacity: 3 unit / month
• Delivery Time: 4 to 12 weeks based on type of models
• Packaging Details: Wooden case

Product Details:

We are involved in manufacturing a large assortment of Tube Filling Machine for seal and fill the plastic, laminate and aluminium tubes. These products are ideal for pharmaceutical, foodstuff and cosmetic industry and we manufacture these products as per the international quality norms. Our products comprise of special hot air tool along with controlled heating and these products are used to fill cream, gel, ointment, paste and balm.

Features:

• Low maintenance
• High functionality
• Long lasting

Available Models:

Additional Information:

• Item Code: FILLTUBE-60
• Production Capacity: 60 unit / year
• Delivery Time: 4 to 12 weeks based on models
• Packaging Details: Wooden Case Packing

Product Details:

We are involved in manufacturing a large assortment of Tube Filling Machine for seal and fill the plastic, laminate and aluminium tubes. These products are ideal for pharmaceutical, foodstuff and cosmetic industry and we manufacture these products as per the international quality norms. Our products comprise of special hot air tool along with controlled heating and these products are used to fill cream, gel, ointment, paste and balm.

Features:

• Low maintenance
• High functionality
• Long lasting

Additional Information:

• Item Code: FT-120
• Production Capacity: 2 pieces / month
• Delivery Time: 6 to 14 weeks depending on customization

Product Details:

Jicon Technologies Pvt. Ltd. offers a high-performance Automatic Rotary Tube Filling Machine designed for precision, hygiene, and reliability in tube packaging. This fully enclosed machine is ideal for filling and sealing creams, ointments, gels, pastes, balms, and other viscous products in laminated and plastic tubes.

Equipped with a single-head rotary index table, the machine delivers an output of 1,500 – 2,400 tubes per hour (25–40 tubes/minute). It features automatic tube loading, electronic orientation, compressed air cleaning, and no-tube-no-fill system for maximum efficiency. The 30-liter hopper with optional water-jacket heating and product agitator ensures consistent product quality during filling.

The filling nozzle is designed with tube lifting and suck-back tail cutting to ensure drip-free, accurate dosing. The machine supports a dosing range of 10 ml to 250 ml with interchangeable syringes and offers leak-proof sealing through a hot air tool. Batch coding is embossed directly in the sealing jaws, while trimmed waste is automatically collected.

With its robust construction, advanced automation, and user-friendly controls, the Automatic Rotary Tube Filling Machine is widely used in pharmaceutical, cosmetic, food, and personal care industries. It guarantees hygienic, leak-proof, and efficient packaging while meeting international quality standards.